Philips 200WP7 User Manual page 21

Regulatory Information
Downloaded from ManualMonitor.com Manuals
file:///D|/EDFU/LCD/200WP7/manual/ENGLISH/200WP7/SAFETY/REGS/regulat.htm (7 of 11)2006-08-04 11:01:19 AM
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All
equipment that works together (computer, monitor, printer, and so on) should have the same power supply
source.
The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device
in the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply
socket, which should be located near the equipment and easily accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of
standards PN-93/T-42107 and PN-89/E-06251.
North Europe (Nordic Countries) Information
RETURN TO TOP OF THE PAGE