Door Bin; Tilt Out Wire Shelf; Door Stop Assembly - Electrolux E32AR75FPS Technical & Service Manual

Component Teardown
Door Bin Removal
There are two door bins that can be arranged as needed
by the user.
To remove a door bin, lift the bin straight up until it is free
of the supports molded into the door liner, then pull from
unit. (See Figure 6-38)
Tilt Out Wire Shelf Removal
The tilt out wire shelves have a bar that locates in the end
caps that enable the wire shelves to tilt outward. The end
caps have two standoffs that snap into holes in the inner
panel.
To remove the tilt out wire shelves:
1. Flex the inner panel outward and lift the wire shelf
out of the end cap. Then pull the opposite end of the
wire shelf out of the opposite end cap.
(See Figure 6-39)
2. The end caps are removed by simply pulling the end
caps out of the inner panel.
Door Stop Assembly Removal
The door stop is secured to with two screws the
underside of the door assembly.
To remove the door stop:
1. Remove door from unit.
2. Extract the two screws securing the door stop to the
bottom of the door assembly. (See Figure 6-40) Door
stop assembly is now free.
Figure 6-38. Door Shelf Guard Removal
End Cap
Wire Tilt-out Shelf
Figure 6-39. Door Lock Removal
Figure 6-40. Door Stop Removal
6-18
End Cap
Door Frame
Screws
Door Stop
Hinge Bearing