Portion Size; Changing The Portion Size During Drink Preparation - Miele CM 6300 Operating Instructions Manual

Portion size

The flavour of the coffee produced
depends not just on the type of coffee
used, but also on the amount of water
used.
You can programme the amount of
water to suit the size of your cups and
the type of coffee you are using.
For coffee drinks that use milk you can
also set the amount of milk or milk froth
to be dispensed with these drinks.
Additionally, you can set the portion
sizes for hot milk and milk froth alone.
Each type of drink has a maximum
portion size that can be programmed
into the machine. The coffee machine
halts preparation of the coffee once this
portion size has been reached. The
maximum possible portion size for this
type of drink is then saved in the
machine.
The changed portion size is always
saved in the current User profile. The
name of the current User profile
appears in the top-left of the display.
There are two ways of initiating the
programming of the portion size:
– By touching the drink sensor when
you are preparing a coffee; or
– By selecting "Portion size" in the
"Parameters" , menu.
If the water container becomes
empty during the preparation of a
drink, the programming of the portion
size will be cancelled. The portion
size will not be saved.
34
Tip: To cancel changing the portion
size, touch the drinks sensor which is lit
up, or touch x for "Further
programmes".
Changing the portion size
during drink preparation
Portion sizes for Espresso . and
Coffee /
^ Place the desired cup under the
central spout.
^ Touch . or / until "Change" appears
in the display.
The coffee machine will now prepare
the selected drink.
You can set the portion size as soon
as "Save" appears in the display.
^ When the cup is filled up to the level
you want, touch OK.
From now on the programmed portion
size will be dispensed for this drink.