Connecting The Device - Fujitsu B19-6 LED Operating Manual

Getting started

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
Connecting cables to the monitor
The supplied data cables have two 15-pin D-SUB connectors or two 24-pin DVI
connectors and a 20-pin DisplayPort connector (not included in delivery scope) for
connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor
against theft. A Kensington lock is not supplied with the monitor.
B22W-6 LED
1 = Holes for fixing swivel arm or wall bracket
2 = Security slot for the "Kensington Lock"
3 = USB-IN sockets
4 = Power connector
5 = DisplayPort socket (DIGITAL)
16
Downloaded from ManualMonitor.com Manuals
2
"Important notes", Page
1
3
1
4
6 = DVI-D connector (DIGITAL)
7 = D-SUB socket (ANALOG)
8 = AUDIO-IN socket
9 = USB-IN sockets
10 = USB-OUT socket
7.
5 6 7 8 9 10
Fujitsu Technology Solutions