Setting functions in the Advanced menu
Downloaded from ManualMonitor.com Manuals
Call up the Advanced setting window
Selecting the input signal
This function allows you to switch the monitor from analogue to digital mode
and vice versa, when several signal sources are connected.
This requires that the graphic card used supports this function.
Activation/deactivation of the DDC-CI
On = The DDC-CI function is enabled (standard setting)
Off = The DDC-CI function is disabled
Activating the factory settings
With this function all settings are reset to the factory settings without
prompting for conﬁrmation.
button to activate the function. The message Auto
Processing is displayed.
Call the Information setting window
With this function the model designation, serial number, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are displayed.
Fujitsu Technology Solutions