Presetting The Radio Stations; Deleting All The Saved Stations; Improving Poor Fm Reception; Seeing Information About A Radio Station(Optional) - LG CM2440DAB Owner's Manual

Presetting the Radio Stations

You can preset 50 stations for FM/DAB.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F on
the unit until FM/DAB appears on the display
window.
2. [FM]
Select the desired frequency by pressing
Y/U on the unit or TUN. -/+ remote
control.
[DAB]
Press TUN. -/+ and press d/M when scanning
stop.
3. Press PROGRAM/MEMORY. A preset number
will blink on the display window.
4. Press PRESET.FOLDER W/S to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S.
CM2440-BB_AGBRLLK_ENG_7046.indd 17

Deleting all the saved stations

1. Press and hold PROGRAM/MEMORY for two
seconds. "CLEAR" will flash up on the display
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.

Improving poor FM reception

Press d/M on the remote control. This will change
the tuner from stereo to mono and usually improve
the reception.
Seeing information about a
Radio station(Optional)
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press SET/RDS
repeatedly to cycle through the various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display.
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
RT (Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme
type by pressing SET/RDS. The display will show
the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and
hold TUN.-/+. The tuner will search automatically.
When a station is found, the search will stop.
Operating 17
3
2014-07-23 9:43:58