Table of Contents
Advertisement
18
Operating
Radio Operations
Listening to the radio
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unit until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning : Press TUN. -/+ on the remote
control or Y/U on the unit for about 2
seconds until the frequency indication starts
changing, then release. Scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN. -/+ on the remote
3
control or Y/U on the unit repeatedly.
3. Adjust the volume by using VOL+/- on the
remote control or VOLUME-/+ on the unit
repeatedly.
CM2030-FP_AAUSLLK_ENG_0986.indd 18
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press TUNER/ST./MO. on the remote control
or FUNC. on the unituntil FM appears in the
display window.
2. Select the desired frequency by pressing
TUN. -/+ on the remote control or Y/U
on the unit.
3. Press PROGRAM. A preset number will blink in
the display window.
4. Press
/
on the remote control or PRE(+)/
PRE(-) on the unit to select the preset number
you want.
5. Press PROGRAM. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
remote control or PRE(+)/PRE(-) on the unit.
Improving poor FM reception
Press TUNER/ST./MO. on the remote control. This
will change the tuner from stereo to mono. Then
the reception will be better than before.
Deleting all the saved stations
1. Press and hold PROGRAM for two seconds.
"ERASE" will blink in the display window.
2. Press PROGRAM to erase all saved radio
stations.
/
on the
2013-06-19
3:23:09
Advertisement
Table of Contents
