Setting The Alarm; Sleep Timer Setting; Dimmer - LG CM2440DAB Owner's Manual

Setting the alarm

You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press ALARM. Each of functions flashes.
3. Press SET/RDS when the function you want to
be woken by is showing.
4. "ON TIME" will be displayed. This is your desired
time to the unit turns on. Press C/V on
the remote control or Y/U on the unit to
change the hours and minutes and press
SET/RDS to save.
5. Press C/V on the remote control or
Y/U on the unit to change the volume
and press SET/RDS to save.
6. If you want to reset the alarm, press and hold
ALARM. Then repeat steps 3-5.
,
Note
y Alarm function only works when the unit is
turned off after setting the alarm.
y If you set the clock time and alarm, you can
check the time by pressing CLOCK or the
alarm by pressing ALARM even when the
unit is turned off.
y If the alarm is already set, press ALARM
once to cancel the alarm. To activate the
alarm, press ALARM once again.
y If the clock time or the alarm is already set,
press and hold CLOCK or ALARM for at
least 2 seconds to reset the clock or the
alarm.
CM2440-BB_AGBRLLK_ENG_7046.indd 21

Sleep Timer Setting

Press SLEEP repeatedly to select delay time
sequence from 180 to 10 minutes. After the delay
time, the unit will be turned off.
To cancel the sleep function, press SLEEP
repeatedly until "SLEEP 10" appears, and then press
SLEEP once again while "SLEEP 10" is displayed.
,
Note
y You can check the remaining time before
the unit is turned off.
y Press SLEEP. The remaining time appears in
the display window.

Dimmer

Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
Operating 21
3
2014-07-23 9:43:58