Listening To Music Stored On The Bluetooth Devices - LG CM2440DAB Owner's Manual

24 Operating
Listening to music stored on
the Bluetooth devices
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device's
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the BT function by using FUNCTION on
the remote control or F on the unit.
"BT READY" will be on the display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
3
display depending on the type of Bluetooth
device. Your unit appears as "LG MICRO(XX:XX)".
,
Note
XX:XX means the last four digits of Bluetooth
address. For example, if your unit has a
Bluetooth address such as 9C:02:98:4A:F7:08,
you will see "LG MICRO (F7:08)" on your
Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
,
Note
Depending on the Bluetooth device type,
some device have a different pairing way.
4. When this unit successfully paired with your
Bluetooth device, "BT PAIR" will be on the
display window
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device's user guide.
,
Note
y Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
y When you use the bluetooth function,
adjust the volume of a bluetooth device to
a proper level to listen to.
CM2440-BB_AGBRLLK_ENG_7046.indd 24
,
Note
y When using Bluetooth® technology, you
have to make a connection between the
unit and the bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the bluetooth device.
- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y You should connect your Bluetooth device
to this unit again when you restart it.
y When you select Bluetooth function again
after changing to other functions, Bluetooth
connection may be disconnected. You
should reconnect the bluetooth device to
use this function.
y The sound may be interrupted when
the connection interfered by the other
electronic wave.
y You cannot control the Bluetooth device
with this unit.
y Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc..
y The more distant between the unit and
the bluetooth device, the lower the sound
quality becomes.
y Bluetooth connection will be disconnected
when the unit is turned off or the bluetooth
device gets far from the unit.
2014-07-23 9:43:59