Presetting The Radio Stations; Listening To The Radio - LG LX-U551 Owner's Manual

Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume to the minimum.
1. Press TUNER on the front panel or
FUNCTION on the remote control to select
the frequency (AM or FM) you want.
2. Select a station you want by pressing
TUNING (-)/(+) buttons.
Tuning in automatically
- Press TUNING (-)/(+) for more than 0.5
second. Scanning stops when the unit
tunes in a stations.
Tuning in manually
- Press TUNING (-)/() briefly and repeatedly.
3. Press PROGRAM/MEMO on the remote
control.
A preset number will flash in the display window.
5. Press PROGRAM/MEMO again.
The station is stored.
6. Repeat steps 1 (or 2) to 5 to store other
stations.
To delete all the memorized stations
Press and hold PROGRAM/MEMO on the
remote control for about two seconds, "CLEAR"
appears in the display window and then
PROGRAM/MEMO on the remote control again,
the stations are deleted.
For your reference
If all stations have already been entered, FULL
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow the steps 4-5.
To recall presets
Press and hold PRESET (-)/(+) (or PRESET
(2
Listening to the Radio
1. Press TUNER on the front panel or
FUNCTION on the remote control) to select
the frequency (AM or FM) you want.
The last received station is tuned in.
2. Press PRESET (-)/(+) (or PRESET ( Y/ A)
on the remote control) repeatedly to select
the preset station you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME
CONTROL KNOB (or pressing VOLUME
To listen to non-preset radio stations
* Use manual or automatic tuning in step 2 on
left.
* For automatic tuning, press and hold TUNING
(-M(*) on the front panel.
To turn off the radio
Press POWER (©) to turn the unit off or select
another function mode [CD/MP3, AUX, USB (LX-
U551 and LX-U251 model only), TAPE].
For your reference
* If an FM program is noisy
Press MODE/RIF so that "STEREO" disap-
pears in the display window. There will be no
stereo effect, but the reception will improve.
Press MODE/RIF again to restore the stereo
effect.
* To improve reception
Reposition the supplied antennas.
otes
* Use MODE/RIF (Radio Interference Filter)
function to switch to mono reception if stereo
reception is distorted by noise.
* When recording the MW(AM) broadcast, beat
noises may occur. If it does, press MODE/RIF
once.