Using The On-Screen Display (Osd) Controls - Lenovo L215p User Manual

Using the On-Screen Display (OSD) controls

2-4
L215p Wide Flat Panel Monitor User's Guide
Downloaded from ManualMonitor.com Manuals
To adjust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
function. If there is a sub-menu, you can move between options using
then press to select that function. Use
save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the button for 10
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
shows on the screen.
to access that
or to make adjustments. Press
for 10 seconds to unlock the OSD and
or ,
to