Setting Up Your Monitor; Connecting And Turning On Your Monitor - Lenovo L215p User Manual

Setting up your monitor

Connecting and turning on your monitor

Downloaded from ManualMonitor.com Manuals
This section provides information on how to set up your monitor.
1.
Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting,
power cord.
and Warranty Guide before carrying out this procedure.
1. Power off your computer and all attached devices, and unplug the computer
power cord.
2. Connect the analog signal cable to the video port on the back of the computer.
Note: One end of the signal cable is already pre-attached to your monitor.
Place the cable into the specific hook indicated in below figure.
3. Connect the HDMI cable to the HDMI connector of the monitor and the other end
on the back of the computer.
Place the cable into the specific hook indicated in below figure.
4. Connect the USB cable to the upstream USB port of the back of the monitor and
the other end to an appropriate USB port on your computer
1-4
Chapter 1.