Emerson 1420 Reference Manual page 8

Smart Wireless Gateway
July 2015
Failure to follow these installation guidelines could result in death or serious injury.

Explosions could result in death or serious injury.

Electrostatic discharge can damage electronics.

Electrical shock could cause death or serious injury.


This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:



The products described in this document are NOT designed for nuclear-qualified
applications. Using non-nuclear qualified products in applications that require
nuclear-qualified hardware or products may cause inaccurate readings.
For information on Rosemount nuclear-qualified products, contact your local Emerson
Process Management Sales Representative.
viii
Make sure only qualified personnel perform the installation.
Verify the operating atmosphere of the device is consistent with the appropriate
hazardous locations certifications.
Use proper personal grounding before handling electronics or making contact with
leads and terminals.
If the device is installed in a high-voltage environment and a fault condition or
installation error occurs, high voltage may be present on transmitter leads and
terminals.
Use extreme caution when making contact with the leads and terminals.
This device may not cause harmful interference.
This device must accept any interference received, including interference that may
cause undesired operation.
This device must be installed to ensure a minimum antenna separation distance of 20
cm from all persons.
Reference Manual
00809-0200-4420, Rev HC