Requirements; Deltav; Smart Wireless Gateway; Mounting And Connecting - Emerson 1420 Reference Manual

Appendix C: DeltaV Ready
July 2015
C.3

Requirements

C.3.1

DeltaV

Version 10.3 or newer.
C.3.2

Smart Wireless Gateway

DeltaV Ready option (Data Protocol option 5). See
C.4

Mounting and connecting

Mount the DeltaV Ready Gateway in the same manner as a standard Gateway.
page
DeltaV control network as well as the wireless field network.
Connect the Gateway's primary Ethernet port (Ethernet 1) into the DeltaV primary control
network. If the dual Ethernet option (Physical Connection code 2) was ordered with the
Gateway, connect the secondary Ethernet port (Ethernet 2) into the DeltaV secondary control
network.
Figure C-1. Delta V Control Network Architecture
B
A. Pro+ Engineering Station
B. Primary Control Network
C. Secondary Control Network
64
16). The Gateway should be mounted in a location that allows convenient access to the
C
D
"Ordering information" on page
A
E
D. Controller and I/O
E. Smart Wireless Gateway
Reference Manual
00809-0200-4420, Rev HC
57.
("Mounting" on
DeltaV Ready