Section 4: Commissioning
July 2015
Figure 4-3. Wireless Network in the Network Configuration
Use the following procedure to configure a HART modem for AMS Wireless Configurator:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
4.6
Licensing and credits
The latest licensing agreements are included on each disk of the software pack.
"This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl.org/)"
"This product includes software written by Eric Young (eay@cryptsoft.com)"
34
Open the Network Configuration application.
Click Add...
Select HART modem and click Install...
Click Next.
Enter a name for the HART modem and click Next.
Select the HART master type (default is AMS Wireless Configurator will be Primary HART
master) and click Next.
Select the COM port for the HART modem and click Next.
Check the box to Check to support Multi Drop devices.
Check the box to Include WirelessHART Adapter.
Click Finish to close the configuration window.
Click Close to exit the Network Configuration application.
Reference Manual
00809-0200-4420, Rev HC
Commissioning