Download  Print this page

Fujitsu B23T-6 LED Operating Manual page 25

Hide thumbs

Advertisement

Select OSD language
If one of the buttons is being pressed for the first time for the OSD menu, the
selection screen for the language is displayed:
► Press the
ECO
► Press the
MENU
button to cancel the process.
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Press the
AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI-D/DP)
► Press the
INPUT
► Press the
ECO
monitor connection (VGA, DVI or DP).
► Press the
MENU
/
button to cancel the process.
This setting window can also be called up when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
on the monitor using the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
/
or the
INPUT
/
/
button to confirm your entries or the
/
button for about 1 second.
/
button to call up the Input select settings window.
/
or the
INPUT
/
button to confirm your selection or the
MENU
/
button for a few seconds while you switch
button to select the required language.
/
button to select the desired
Operation
AUTO
/
AUTO
21

Hide quick links:

Advertisement

loading