MESSAGE
114
(example)
[No "mm" before the
result and no
decimal point]
battry
clean
test
area
PROBLEM
The language and unit of
measurement have been
changed to "P 1" English
(mg/dL) either accidentally
or through an electronic
malfunction.
The battery is too low. The
Meter will not operate.
1) There is dirt, blood, or lint
on the Test Area.
2) Your hand or an object
covered the Test Area while
the Meter was turned on.
WHAT TO DO
See Setting the Meter, page 7,
to reset the language and
unit of measurement to
"P 3" English (mmol/L).
Replace the battery.
Clean the Test Area
and Test Strip Holder
according to instructions.
Repeat the test. Keep
Test Area clear.
44