Perfect Multi-Gym Pro User Manual page 11

STEP 2 - Installing the Safety Clip
After the Multi-Gym
adjusted to fit the doorway,
remove it from the doorway
and install the Safety Clip.
a) On the inside of the doorway,
place the Safety Clip above
the molding in the center at
the top of the door.
b) Slide the pointed end between
the wall and the molding. Push
downward until Safety Clip is
flush against the molding.
Reinstall the Multi-Gym
in the doorway.
When attaching the Multi-Gym
securely attached to both the molding and Multi-Gym
instruction may result in serious injury or death.
Completed Installation
You can reinstall the Multi-Gym
When properly installed, the Multi-Gym
Connecting
Bar
Side View
Remove the Multi-Gym
to a different door, you must recheck the fit and adjust the product to fit the new doorway
if necessary. Failure to follow these instructions may result in serious injury or death.
Pro has been
®
Pro
®
Pro in the doorway once the Safety Clip is installed.
®
Wall
Molding
Left and Right
Bar Assembly
Hand Grip
Front
Grey
Foam
Pro from the door frame when not in use. If the product is moved
®
Safety Clip
a
Molding
Pointed
End
Inside of
Doorway
(hinged side)
Pro to a door frame, make sure the Safety Clip is
®
Pro will fit in the doorway as shown below.
®
View from Inside Doorway
10
b
Door
Hinges
Pro. Failure to follow this
®
Safety
Connecting
Bar
Clip
Molding
Inside of
Doorway
(hinged side)