Perfect Weight Vest User Manual

GETTING STARTED

Your Perfect Weight Vest was designed so you can vary your workout by removing or adding
weights. We suggest starting out with less weight and building your way up to the maximum
allowable weight (depending on the vest you purchased). Always keep the weight distribution
even for your left and right side and front to back.
To add or remove weights, locate the
pockets inside the Weight Vest, remove
weights by grabbing the weight from the
top and gently pulling through the hole.
Once you have selected your weights,
put weighted vest on by placing your head
through the hole (reflector logo should
be in the back).
Wrap the straps around your body so the
vest is snug against your body and fasten
the Velcro . The Velcro strap with the
®
reflective logo should be on the outside so
it can be easily seen when you are wearing
the Weight Vest.
DO NOT fasten too tight, as this could
restrict your breathing or movement.
Perfect develops innovative fitness solutions that maximize muscle
engagement and biomechanical efficiency. Our products use simple, natural
movements and back-to-basics principles to enable anyone to unlock their
potential. Visit www.PerfectOnline.com to learn more.
©2017 Implus LLC • All rights reserved.
Perfect Fitness® and Perfect® are a registered trademarks of Implus LLC
www.PerfectOnline.com
VELCRO ® is registered trademark of Velcro Industries B.V.
®
LYCRA is a trademark of INVISTA.
No part of this booklet may be reproduced or utilized in any form or by any means electronic,
mechanical or otherwise without the expressed written consent of the copyright holder.