Table of Contents
Advertisement
USB
By default, when you connect your phone to a host computer
with a USB cable, the USB data connection is automatically
enabled. This means that certain media files on the phone,
including pictures and music, are accessible through
Windows Explorer on the host computer.
You can set the phone to display a dialog that asks for
permission to enable the data connection when you connect
the phone to a host computer with a USB cable.
1. From the Home screen, tap
system menu, tap USB.
2. Tap Ask me before using USB data connection to
enable this function.
When this function is enabled, connecting your phone to a
host computer with a USB cable causes the Use USB data
connection? screen to display
Tap yes to connect or no to cancel the connection.
127
Settings. Under the
Date + Time
This menu allows you to decide if you want the date and time
automatically set or if you want to enter the date and time
manually. You can also configure the phone to use a 12-hour
or 24-hour format.
To configure the way the date and time display on the device:
1. From the Home screen, tap
system menu, tap date + time.
2. To turn 24-hour clock mode on, touch and slide the
24-hour clock slider to the right.
When turned Off, the 12-hour clock displays.
3. To set the date and time automatically, touch and slide
the Set date and time automatically slider to the right.
4. To set the time zone automatically, touch and slide the
Set time zone automatically slider to the right.
Settings. Under the
Advertisement
Table of Contents
