Settings: Customising your machine
Display (Contrast, Brightness)
Volume (Keypad tone, Buzzer)
46
^ Select "Settings F" from the main menu and touch the OK
sensor.
Settings
Water hardness
Display
^ Use the arrow sensors to highlight "Water hardness" and
then touch the OK sensor.
^ Touch one of the arrow sensors to set the water hardness
and touch the OK sensor.
The water hardness level selected is saved to memory.
You can adjust both the contrast and the brightness of the
display:
^ Select "Settings F" from the main menu and touch the OK
sensor.
Settings
Display
Volume
^ Touch the right arrow sensor until "Display" is highlighted
and touch the OK sensor.
^ Touch one of the arrow sensors to select "Contrast" or
"Brightness" and touch the OK sensor.
^ Touch one of the arrow sensors to set the contrast lower or
higher or the brightness lighter or darker.
^ Touch the OK sensor to save the setting.
You can choose for a keypad tone to sound each time a
sensor is touched. The volume of the tone can also be
adjusted:
^ Select "Settings F" from the main menu and touch the OK
sensor.