Eu-Declaration Of Conformity - Laserworld Pro-700RGB User Manual

User manual: Pro-700RGB

EU-declaration of conformity

We hereby confirm that the following device
Laserworld Pro-700RGB
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the provisions of law of all participating EU states on the
electromagnetic compatibility (89/336/EWG).
The device has been classified considering the following EU-norms on
electromagnetic compatibility:
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment of compliance of the product with the requirements relating to the Low Voltage
Directive (LVD 2006/95/EG) was based on the following standards:
DIN EN 60065 : 2002
Furthermore, the device is verified in correspondence to the laser class regulations DIN EN
60825-1, if properly set up according to the upper mentioned laser safety regulation.
After installing the device, an inspection and official approval is indispensable for the overall
setup. The inspection must follow the european guidelines EN 60825-1 and corresponding
regulations for the prevention of accidents BGV-B2.
This declaration is executed on behalf of the Laserworld Pro-700RGB manufacturer
Laserworld (Switzerland) AG
Oberstrasse 1
8274 Tägerwilen
SCHWEIZ
Vertretungsberechtigte Personen:
Verwaltungsrätin Rhea Gössel
Sitz des Unternehmens: 8274 Tägerwilen / Schweiz
Firmennummer: CH-440.3.020.548-6
Handelsregister Kanton Thurgau
www.laserworld.com
info@laserworld.com
Bevollmächtigter im Sinne des EMVG:
Cleantech Europe GmbH
Geschäftsführer: Thomas Schulze
Fürkhofstr. 5
81927 München / DE
Page 9 of 9
Rev: 01/2009