Samsung Electronics - Samsung AP500PF Service Manual

3-1-2 Key type and functions
3-1-2(a) PANEL key type and functions
Key name
On/off Start and end of operation
- ON 1 time = operation start, ON again = operation end.
- No continued operation
Mode selection Change of the operation mode
- Each time the button is pressed(ON), the mode is changed in the following order:
- No continued operation
Fan speed Setting of the indoor fan motor speed
selection - Each time the button is pressed ON, the mode is changed in the following order:
Temperature(time) Increase the desired temperature(current time)
setting(up) - Temperature: When pressing the button(ON) one time,
- Time: When pressing the button(ON) one time, the time is increased by 1 minte.
- One short, and continued operation
Temperature(time) Decrease the desired temperature (current time)
setting(down) - Temperature: When pressing the button(ON) one time,
- Time: When pressing the button(ON) one time, the time is decreased by 1 minute.
- One short, and continued operation
Change of display The temperature and current time can be changed.
- If the "on" key is pressed 1 time, current temperature
- If the "on" key is pressed 1 time, current time is displayed.
* Operating functions
Button for speed selection: When pre s s i n g
Fan display: The fan is dis-
the button, the mode i s selected in the
played in the order of turbo,
o rder of high-medium-low.
high, medium, and low.
Display change button: When the button i s pressed, cur-
rent time and temperature are displayed continuously.
3-2
Key operating function
"auto cool fan"(standard=auto)
"low medium high"(standard=high)
the desired temperature is increased by the unit of 1°C.(18°C- 30°C)
If the "on" button is pressed continuously, the time is increased by 10 minutes.
the desired temperature is decreased by the unit of 1°C. (18°c- 30°C)
If the "on" button is pressed continuously, the time is decreased by 10 minutes.
and desired temperature are displayed.
Time and temperature display: Cool display: The door tempera-
C u rrent time, re s e rve time, and t u re is sensed and the button is
t e m p e r a t u re are displayed. lighted when cooling is begun.
Up/down button: It can regulate curre n t Function selector button: when pressing the button, the mode
time and desired temperature . can be selected repeatedly in the order of auto-cool-fan.
Sensor to perceive re m o t e
Function selector dis-
Left-right turn
c o n t roller: It can re c e i v e
play: Current mode of
d i s p l a y.
o rders from remote contro l l e r.
operation display.
Convenience re s e rv e
button: It can stop the
operation automatically.
Key type
TACT
TACT
TACT
TACT
TACT
TACT
O n / o ff button.
Operation di s play lamp:
When the power is first
R e s e rve display:
applied, the lamp will
Convenience re s e rv e
blink, but will turn on
operation is perc e i v e d
when operation begins.
when ord e red to do so.

Samsung Electronics