Table of Contents
Advertisement
ULTAMUS RAID 1200 Hardware Setup Guide
Attach AC power cords
1. Swing the Cable Strain Relief Bale out of the way and plug the power cord
2. Place the bale over and onto the cord.
3. Repeat
10400165-101 01/2008
into the PSU socket.
Steps 1–2
for the other PSU and cord.
CAUTION:
The power connections must always be disconnected prior to removal of
the Power Supply module from the chassis.
©2007-2008 Overland Storage, Inc.
Installing and Connecting
2-13
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Ultamus Raid 1200 and is the answer not in the manual?