TYAN S7086 User Manual page 31

Heat sink Installation
After installing the processor, you will need to proceed to install the heat sink. The
CPU heat sink will ensure that the processor do not overheat and continue to
operate at maximum performance for as long as you own them. An overheated
processor is dangerous to the motherboard. The processors will overheat within
seconds, enter thermal protection, and shut down if heatsinks are not installed.
Caution：Take caution of the air flow must be in the direction which paralleled with
memories.
For the safest method of installation and information on choosing the appropriate
heat sink, using heat sinks validated by Intel
http://www.intel.com
The following diagram illustrates how to install the heatsink on the Intel
Socket R3:
1. Tear down the heatsink protective cover.
2. Place the heat sink on top of the CPU.
3. Secure the heatsink screws.
®
. Please refer to the Intel
31
http://www.tyan.com
®
website:
®
Haswell EP