Before Operation; Setting The Clock - Sharp R-371 Operation Manual

Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR key.
3. The display will show:
To set the clock, see below.
Your oven has a 12 hour and a 24 hour clock.
To select the 12 hour clock, press the
appears on the display.
To select the 24 hour clock, press the SET CLOCK twice until 24H
appears on the display.
Example:To set the time of day follow the instructions below (12H) :
1. Press the SET CLOCK
once, then
the display.
4. The time will be showed
on the display.
NOTES:
Press the STOP/CLEAR key if you make a mistake during programming.
If you press any of the TIME keys too many times, continue to press the key until the desired time
re-appears.
To check the time of day during a cooking process, press the SET/CLOCK key.
and the time of day will remain on the display as long as you keep your finger on the key.This does not
affect the cooking process.
If the clock is set, when cooking is complete, the display will show the correct time of day.
If the clock has not been set, the display will only show
If the electrical power supply to your microwave oven is interrupted, the display will intermittently
show after the power is reinstated. If this occurs during cooking, the programme will be
erased.The time of day will also be erased.
When you want to reset the time of day, follow the above example again.
R-371

BEFORE OPERATION

SETTING THE CLOCK

SET CLOCK once until 12H
2. Enter the hours by
appears on
pressing the TIME
keys.
x1
1.
2.
3.
3. Press the SET/CLOCK
when cooking is complete.
8
x1
clock
x1
x2
key once to confirm.
x1
11/20/2010