Vision Fitness T80 Owner's Manual page 10

RECOMMENDED CLEANING TIPS
A Use a soft, clean cotton cloth. DO NOT use paper towels to
clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth. DO NOT use ammonia
based cleaner. This will cause discoloring of the aluminum
and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This
could cause electrocution.
D Wipe the console and side rails after every use.
E Be sure to remove any obstructions from the path of the
elevation wheels including power cords.
F Monthly, unplug the treadmill and remove the motor cover.
Check for debris and clean with a dry cloth or small vacuum
nozzle.
WARNING: Do not plug the treadmill in until the motor
cover has been reinstalled.
CAUTION: Be sure to have proper assistance to install and
move the unit in order to avoid injury or damage to the treadmill.
18
VF_12_T80_OM_rev1_7.indd 18-19
DECK AND BELT REPLACEMENT
One of the most common wear and tear items on a treadmill is
the deck and belt combination. If these two items are not properly
maintained they can cause damage to other components. This
product has been provided with the most advanced maintenance
free lubricating system on the market. The treadmill deck does
not require any maintenance, other than cleaning and belt
tightening.
WARNING: Do not run the treadmill while cleaning the belt and
deck. This can cause serious injury and can damage the machine.
Maintain the belt and deck by wiping the sides of the belt and
deck with a clean cloth. The user can also wipe under the belt
2 inches on both sides removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an
authorized service technician. Please contact Vision Fitness for
more information.
WARNING
To remove power from the treadmill, the power cord must
be disconnected from the wall outlet.
CHECK FOR DAMAGED PARTS
DO NOT use any equipment that is damaged or has worn or
broken parts. Use only replacement parts supplied by Vision
Fitness.
MAINTAIN LABELS AND NAMEPLATES Do not remove
labels for any reason. They contain important information. If
unreadable or missing, contact Vision Fitness for a replacement
or an authorized service provider.
MAINTAIN ALL EQUIPMENT Preventative maintenance is
the key to smooth operating equipment, as well as keeping the
user's liability to a minimum. Equipment needs to be inspected
at regular intervals. Defective components must be replaced
immediately. Improperly working equipment must be kept out
of use until it is repaired. Ensure that any person(s) making
adjustments or performing maintenance or repair of any kind
is qualified to do so. Vision Fitness will provide service and
maintenance training at our corporate facility upon request or in
the field if proper arrangements are made.
CARE AND MAINTENANCE
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents
on plastic parts. Cleanliness of your treadmill and its operating
environment will keep maintenance problems and service calls to
a minimum. For this reason, Customer Tech Support recommends
that the following preventive maintenance schedule be followed.
DAILY
• Clean entire machine using water and mild detergent such as
"Simple Green", or other Vision approved solution (cleaning
agents should be alcohol and ammonia free).
19
11/2/12 9:51 AM