Pride Mobility Victory ES9 Owner's Manual page 38

Victory es series
Table of Contents

Advertisement

I X . C A R E A N D M A I N T E N A N C E
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and
you have a flat tire, you can have the tube replaced.
If your scooter is equipped with a solid tire insert,
either the solid insert or the entire wheel must be
replaced depending on the model. Contact your
authorized Pride Provider for information regarding
replacement wheels for your scooter.
WARNING! Wheels on your scooter
should only be serviced/replaced by
an
authorized
qualified technician.
WARNING! Completely deflate pneumatic tires before dismantling the rim or attempting
repair.
WARNING! Be sure that the key is removed from the key switch and the scooter is not in
freewheel mode before performing this procedure repair.
WARNING! When changing a pneumatic tire, remove only the lug nuts, then remove the
wheel. If any further disassembly is required, deflate the tire completely or it may explode.
Follow these easy steps for a quick and safe repair for solid tires:
1. Remove the key from the key switch.
2. Elevate the side of the scooter of which you are removing the tire. Place wooden blocks under the
frame to elevate the scooter.
3. Remove the drive wheel nut and washer from the axle. See figure 26.
4. Pull the wheel off the axle.
5. Slide the new wheel back onto the axle. Make sure the axle key is in the axle slot.
WARNING! Failure to ensure that the axle key is properly installed into the axle slot when
mounting the wheel can result in electronic brake failure, personal injury, and/or product
damage.
6. Reinstall the drive wheel nut and washer onto the axle and tighten.
WARNING! Make sure that both the nut and washer are reinstalled and tightened
properly.
7. Remove the blocks from beneath the scooter.
ABS PLASTIC SHROUDS
The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are
coated with an advanced formula urethane paint.
A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
38
Pride
Provider
or
www.pridemobility.com
WASHER
NUT
Figure 26. Solid Tire Wheel Removal
AXLE KEY
Victory ES Series

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Victory es10

Table of Contents