To change the PSK for a remote client:
1. Click Settings > General > VPN.
2. In the Remote Client to GW VPN Configuration section, click the Edit button next to the Pre-
Shared Key field.
3. Enter the new value
4. Click the Save button.
The new pre-shared key is saved.
Enable the Client-to-Gateway VPN
Enabling the VPN activates the remote client-to-gateway VPN server feature on the gateway. If you
disable the VPN, your settings are retained.
To enable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The default
password is password.)
4. Click Settings > General > VPN.
5. Select the VPN Status Enable radio button.
6. Click the Apply button.
The VPN connection is activated.
To disable the VPN:
1. On a computer or wireless device that is connected to your gateway, launch a Web browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The default
password is password.)
4. Click Settings > General > VPN.
5. Select the VPN Status Disable radio button.
6. Click the Apply button.
The VPN connection is disabled, but your VPN settings are retained.
Set Up a Virtual Private Network (VPN)
98