Replacing The Door Gasket; Reversing/Changing The Door Hinge - Lec EssenChill BFS200W User Manual

Replacing the Door Gasket

Pull the gasket out from the door and replace it with
a new one.
Make sure the new gasket seals against the unit and
there are no air gaps.
You may use a hot air gun (hair drier) to mould the
new gasket on to the door if required.
Note: Replacement door gaskets are available from
our Spares Department
We advise that you clean the door gasket frequently
Changing the Door Hinge
To change the door hinge from right-handed to left-handed or vice versa:
1. Switch off power at the mains socket and remove the plug from the mains
socket.
2. Remove the top panel and disconnect the multi plug inside.
3. Remove the hinge pin, and lift off the door.
4. Move hinge from one side to the other.
5. Move the handle from one side to the other.
6. Place the door in the hinge on the desired side. Insert hinge pin in the hinge
and in the door hinge bush. Fasten the hinge.
7. Re-connect the multi plug to the panel, and secure the panel. Re-connect to the
mains.
Changing the door hinge requires at least 2 people and should not be attempted
on your own.
Note: A series of pictorial instructions are available on request from our After Sales
department. Simply call 0844 815 3755 and one of our advisors will be able to send these
to you.
www.lec-commercial.co.uk 17