Positioning - Lec EssenChill BFS200W User Manual

Positioning your Lec essenChill freezer
When positioning your Lec essenChill freezer, please ensure you have taken into
account the following factors:
In order to conserve electricity, do not place your appliance near a source of
heat, such as a radiator. Try to avoid locations where the appliance could be
exposed to direct sunlight.
If the product is to be placed next to another unit or a wall, there should be at
least a 20cm gap. Increase this distance if the obstacle is a heat source.
This freezer must be placed on a hard flat surface. It is important that the 2 front
feet are adjusted so that the unit stands firm and level.
The internal temperature of this appliance is affected by location, room
temperature, and frequency of opening the door. The factory settings of the
electronic control (thermostat) are set to allow for these conditions. This
appliance is designed to operate in ambient temperatures between +16°C and
+36°C. Operating outside of these temperature parameters may cause the
appliance to perform out of specification.
www.lec-commercial.co.uk 5