Switching The Door Mounting - Lec CU 157 Operating Instructions Manual

Switching the Door Mounting Side
To switch the door mounting side you
should:
● Turn off the main switch (Phot. 3(1)).
Unplug the mains cord.
Take out all the food from the appliance.
● Remove the adjustment feet.
● Unscrew the lower hinge (Phot. 7) and
the element fastening the foot (Phot. 8)
● Take out the freezer door.
● Unscrew the bolt from upper the hinge,
unscrew the hinge and fasten it at the left
side of the refrigerator. Screw the bolt into
the extreme opening (Phot. 9).
● Mount the door by inserting the hinge
bolt into the door bush and close the
door.
● Tilt the appliance back, a magnetic ga-
sket will support the housing door.
● Unscrew the lower hinge bolt, drive
it into the second opening of the hinge
(Phot. 7(1)).
● Insert the tightened lower hinge bolt in
the lower door bush and fasten the hinge
on the left side of the freezer by driving in
three screws.
● Tighten the element fastening the foot
screw with three screws, replacing the
left hinge.
● Drive the adjustable feet.
● Fasten the freezer door handle opposite
to the hinges.
● Turn on the freezer.
13
GB/IE
(1)
Bild 15
9
7
8