Motorola SURFboard SB4100 User Manual page 10

SURFboard
to computer
USB to computer
to cable outlet
Power cord to
electrical outlet
Introduction Before You Begin
R
You must call your service provider to activate
your service. You need to provide the media
access control (MAC) address. This address
is found on the bar code label marked
HFC MAC ID on the rear panel.
Ethernet
The address format is 00:20:40:xx:xx:xx.
Precautions
TV cable
•
Do not block the ventilation holes on the sides
of the modem preventing it from overheating.
•
Do not open the SB4100 cable modem. Refer
all service to your local service provider.
•
Wipe the modem with a clean, dry cloth.
Never use cleaning fluid or similar chemicals.
Do not spray cleaners directly on the unit
or use forced air to remove dust.
Installation Operation Basic Configuration Troubleshooting
6
TM