Related Manuals for ParaBody 829102
Summary of Contents for ParaBody 829102
- Page 1 I II Serious 829102 LEG CURL/EXTENSION ASSEMBLY INSTRUCTIONS Part # 6668901 Revision: 09/12/97...
- Page 2 2. Do not allow minors or children to play on or around this equipment. 3. Exercise with care to avoid injury. 4. If unsure of proper use of equipment, call your local Parabody distributor or call the Parabody customer service department at (800) 328-9714.
-
Page 3: Parts List
2 ~[ 1" END CAP 3102416 HINGE TAB 6406401 3/4" SQ RUBBER BUMPER 3104301 1-1/2 X 3/4" GLIDE (QTY" 8) 6416601 1/2" FLANGE BEARING 3107801 STA]~LOCK COLLAR 3105401 1.,1/4 X 5" GRIP 3103101 PARABODY LOGO END CAP 6467001 NYLOCK NUT NYLOCK NUT... - Page 4 STEP 1: Insert four PARABODY LOGO END CAPS (37) into the ends of REAR BASE LEG (12) and FRONT BASE SUPPORT (1). See FIGURE STEP 2: Slide two 1-I/4 x 5" GRIPS (36) over tubes on REAR. BASE LEG (12). See FIGURE...
- Page 5 STEP 6:Securely assemble RIGHT (9) & I.EFT (10) LEG EXT HANDLES to LEG FRAME (11) using two 3/8 X 4" BOLTS (21), four 3/8" FLAT WASHERS, and two 3/8" LOW HEIGHT NYLOCK NUTS (27). See FIGURE STEP 7:Insert two 3 X 2" END CAPS (29) into the leg fi:ame as shown in FIGURE 5.
- Page 6 STEP 10: Securely assemble BACK PAD ADJUST TUBE (2) & BACK PAD SUPPORT TUBE (3) to LEG FRAME (11) using one 1/2 BOLT (23) and one 1/2" LOW HEIGHT NYLOCK NUT (26). (NOTE: SECURELY TIGHTEN BOLT THEN BACK NUT OFF TURN TO ALLOW THE TWO PARTS TO ROTATE FREELY.) See FIGURE 8.
- Page 7 STEP 13: Slide two H]NGE TABS (31) over posts LEG FRAME (I 1). See FIGURE 11. STEP 14: Securely attach the SEAT PAD (8) to the HINGE TABS (31) using two 3/8 X BOLTS (19) and two 3/8" FLAT WASH- ERS (24).
- Page 8 STEP 16: Attach eight 1-1/2" X 3/4" GLIDES (33) to ROLI.ER PAD ADJUSTER (4) and attach eight 1-1/2" X 3/4" GLIDES (33) to 13-1/2" ROLLER PAD ADJUSTER (5) as shown in FIGURE 14. STEP 17: Securely assemble two 3/8" SPRING PIN AS- SEMBLIES (17) into the spring pin barrels the LEG CURL/EXTENSION (6) as shown...
- Page 9 LEG FRAME (11).See FIGURE 17. STEP 23:Attach four ROLLER PADS (15) to the LEG CURL/EXTENS]:ON ROLLER PAD SHAFTS (13) and four STARLOCK COLLARS (35). TI~IS CONCLUDES T_Wi~.~ ASSEMBLY OF TIlE PARABODY 829102 LEG CURL/EXTENSION FIGURE 18 [ I I (6) and I,G.UR E 17...