Troubleshooting - Kia Rio User Manual

Troubleshooting

Problem
The fuse is disconnected.
The power does not
turn on.
Device is not properly connected.
The image color or tone The brightness, saturation, hue, and contrast
quality is low. levels are not properly set.
The brightness level has been set to the lowest
The video does not
level.
work.
The device is not properly connected.
The volume level is set the lowest level.
The sound does not
The connector is not properly connected.
work.
The device is currently fast-forwarding,
rewinding, scanning, or playing in slow mode.
The DISC is dirty or scratched.
Vibration is occurring from the position in
The sound or video
w h i c h t h e co nve r s i o n s w i tc h h a s b e e n
quality is low.
installed.
The color and tone quality of the image is low.
Possible Cause Solution
Replace with a suitable fuse. If the fuse is disconnected again,
please contact your point of purchase or serviece center.
Check to see that the device has been properly connected.
Adjust the brighteness, saturation, hue, and contast levels
through the display setting.
Adjust the brighteness to a higher level.
Check to see that the device has been properly conneted.
Adjust the volume level.
Check the connection state.
The sound will not work when the device is fast-forwarding,
rewinding, scanning, or playing in slow mode.
Wipe off water or dirt from the DISC. Do not use a disc which
has been scratched.
The sound may be short-circuited and the image distorted if
the device begins to vibrate. The device will return to normal
operation once the vibration has stopped.
Aging of the video display and deterioration in performance
may cause certain quality degradations.
6-3
APPENDIX