PART 2 Audio SYSTEM
Storing FM/AM presets
1. Select the desired frequency.
[Selecting FM/AM broadcast frequency],
page 2-4.
2. Press the preset button to store for over 0.8
second. The frequency will become stored
along with a beep sound.
INFORMATION
Six preset frequencies each for FM1/FM2/AM
modes can be stored using the above instruc-
tions.
Scanning FM/AM broadcast frequency
1. Press the
Scan
button.
SCAN (less than 0.8 second) : Scans all fre-
●
quencies and plays only frequencies with
superior reception for 5 seconds each.
Voice Command
1.
Press the
...
key on the steering wheel
remote controller.
2.
After the beep sound, say a command.
"Scan"
2-4
AUDIo SYSTEM
PRESET SCAN (over 0.8 second): Scans the 6
●
frequencies stored as preset frequencies in
the current band for 5 seconds each.
Voice Command
1.
Press the
...
key on the steering wheel
remote controller.
2.
After the beep sound, say a command.
"Preset Scan"
2. Press the
Scan
button again to continue
listening to a frequency. The scan will be
terminated and the current frequency will
continue to be played.
INFORMATION
When scanning has completed an entire revo-
lution, the scan function will be terminated
automatically and the previous played frequen-
cy will be restored.