Hammer Strength OHDPR8 Assembly Instructions Manual page 14

FIGURE 11
4
4
13
12
9
10
2
27
1
STEP 11:
• Insert the LEFT BAR SUPPORT (12) into the desired slots of the LEFT ADJUSTMENT RACK (10), and allow it to drop down to lock in
place. See FIGURE 11.
• Repeat the above step to assemble the RIGHT BAR SUPPORT (13) to the RIGHT ADJUSTMENT RACK (9).
• Insert twenty-two 9/16" HOLE CAPS (27) into the holes of the REAR UPRIGHTS (4) and the LEFT & RIGHT UPRIGHT BASE (1 & 2)
as shown in FIGURE 11.
14