Panasonic WV-CZ362E Operating Instructions Manual page 5

Basic operation
The description below explains how to operate the setup menu basically.
The operations in the setup menu are performed with the operation buttons after calling up the setup
menu on the connected video monitor. Refer to the installation guide for further information about
the operation buttons. The operations in the setup menu can also be performed through the system
controller (option).
Screenshot 1
Hold down the setting button for approx. 2 sec-
onds to call up the top screen of the setup menu.
** WV-CZ362 SETUP **
CAMERA
PRESET POSITION
SPECIAL
COMMUNICATION
PASSWORD LOCK OFF
END
Screenshot 2
The selected setup screen in the setup menu
appears on the screen.
** CAMERA SETUP ** 1/2
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
DNR
RESOLUTION
BW MODE
** CAMERA SETUP ** 2/2
PRIVACY ZONE
AF MODE
ZOOM LIMIT
UPSIDE-DOWN
MIRROR
RET TOP END
OFF
ALC
AUTO
ON(MID)
OFF
INT
ATW1
OFF
LOW2
NORMAL
OFF
STOP AF
X 22
OFF
OFF
Step 1
Move the cursor to the item to be set, and
press the setting button.
Step 2
Perform the settings for each item.
Selection of setting item:
Press the UP button or DOWN button to
move the cursor.
Change of settings:
Press the RIGHT button or LEFT button.
Display of advanced setup screen:
Press the setting button when "
attached to the target setting item.
Return to previous setup screen:
Move the cursor to "RET" and press the set-
ting button.
Return to top screen:
Move the cursor to "TOP" and press the set-
ting button.
Step 3
To return to the camera image screen, move
the cursor to "END" and press the setting but-
ton.
" is
5