Setup Menu - Panasonic WV-CZ362E Operating Instructions Manual

SETUP MENU

Performing each setting item in the setup menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
Refer to the Operating Instructions (PDF) for further information.
List of setup menu
Setup item
CAMERA
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
DNR
RESOLUTION
BW MODE
PRIVACY ZONE
AF MODE
ZOOM LIMIT
UPSIDE-DOWN
MIRROR
PRESET POSITION
PRESET
MAP
HOME POSITION
SELF RETURN
IMAGE HOLD
SPECIAL
CHROMA GAIN
AP GAIN
PEDESTAL
PIX OFF
ZOOM INVERSE
FOCUS INVERSE
REFRESH
CAMERA RESET
COMMUNICATION
PASSWORD LOCK
4
Description
Performs the camera operation settings.
This item specifies the camera title. The camera title that indicates the cam-
era location and other information about the camera is created with alphanu-
meric characters and symbol, and displayed on the screen.
Performs settings Light control.
Specifies the electronic shutter speed.
Specifies gain adjustment.
Specifies electronic sensitivity enhancement.
Specifies the synchronization type.
Specifies white balance adjustment.
Performs settings Motion Detector.
Selects the level of the digital noise reduction function.
Selects the resolution NORMAL or HIGH.
Performs each setting regarding the black-and-white mode such as
Switching between color and black-and-white images.
Hides undesired portions in the camera shooting area.
Select setting auto focus mode.
A limitation is provided to prohibit the ZOOM operation in the direction of
TELE, exceeding the preset value.
The video image is reversed upside down during ON setting.
The video image is reversed to the right and left during ON setting.
Performs settings preset position.
Select the position number. The preset setting menu appears on the monitor
screen.
The PRESET NUMBER SET menu appears on the monitor screen.
To set a position number for the home position
Set up the time needed to return to the home position automatically.
The camera picture remains as a still image on the monitor screen until the
camera reaches the preset position.
Setting the Chroma Level.
Setting the Aperture Level.
Setting the Pedestal Level.
This setting can assign a blemish position and compensate the blemish.
The TELE/WIDE operation from the lens control terminal or the UP and
DOWN buttons is reversed during ON setting.
The FAR/NEAR operation from the lens control terminal or the UP and DOWN
buttons is reversed during ON setting.
The Refresh operation is started.
The camera is reset to the factory default settings.
Select RS485 or COAX or COAX (RCV).
Performs settings password lock.