How To Operate The Area Shot Function (U.s.a. And Canada Only); About The Area Shot; To Use The Area Shot Function; Map Data - Eclipse CD5000 Owner's Manual

CD5000_ENG.book Page 43 Wednesday, December 7, 2005 6:22 PM
How to operate the AREA SHOT function
(U.S.A. and CANADA only)

About the AREA SHOT

Using AREA SHOT function, maps to destinations and guidance information can be displayed on your
main unit if you have set route on the ECLIPSE web site (E-iSERV).

To use the AREA SHOT function

In order to use AREA SHOT, driving instructions for the direction of travel and the street names of intersections
to turn, first they must be downloaded from the ECLIPSE web site (E-iSERV) and imported into the CD5000.
The process is as follows:
Access The ECLIPSE Website. (URL: http://www.e-iserv.jp)
Register as a user. A User Registration Key is required when
registering. For details of User Registration Key, see page 76.
(To register, follow the instructions provided by the web site. Once you
have registered, there is no need to repeat the procedure.)
Login.
Set your start point and destination on the AREA SHOT page. Address or
intersection, city, state/prov and zip/postal code can be used to search for
start points, routes and destinations. Your home can be registered as a
memory point. (Follow the instructions provided on the web site.)
Download information.
Write the downloaded information to a CD-R or Memory Stick.
Import the data written to the CD-R or Memory Stick into the CD5000.
(For details, see page 44.)
AREA SHOT is ready for use.

Map data

The map data used by the main unit was created based on information provided by NAVTEQ (U.S.A.
and CANADA).
When using the map data, be aware of actual road conditions and obey traffic rules.
Copying, publishing or using maps in electronic media without express written consent is forbidden.

How to operate the AREA SHOT function (U.S.A. and CANADA only)

VIII
IX
43