How To Operate The Area Shot Function (U.s.a. And Canada Only); About The Area Shot; To Use The Area Shot Function; Map Data - Eclipse CD3000 Owner's Manual

Various Settings
How to operate the AREA SHOT function
(U.S.A. and CANADA only)

About the AREA SHOT

Using AREA SHOT function, maps to destinations and guidance information can be displayed on your
equipment if you have set route on the ECLIPSE web site (E-iSERV).
ATTENTION
The display in this manual may differ from that of the main unit.

To use the AREA SHOT function

In order to use AREA SHOT, driving instructions for the direction of travel and the street names of intersections
to turn, they must first be downloaded from the ECLIPSE website (E-iSERV) and imported into the CD3000.
The process is as follows:
Access The ECLIPSE Website. (URL: http://www.e-iserv.jp)
Register as a user. A User Registration Key is required when registering. For details
about User Registration Key, see page 57.
(To register, follow the instructions provided by the website. Once you have
registered, there is no need to repeat the procedure.)
Login.
Set your start point and destination on the AREA SHOT page. Address or
intersection, city, state/prov and zip/postal code can be used to search for start
points, routes and destinations. Your home can be registered as a memory point.
(Follow the instructions provided on the website.)
Download information.
Write the downloaded information to a CD-R.
Import the data written to the CD-R into the CD3000. (For details, see 33.)
AREA SHOT is ready for use.

Map data

The map data used by the deck was created based on information provided by NAVTEQ (U.S.A. and
CANADA).
When using the map data, be aware of actual road conditions and obey traffic rules.
Copying, publishing or using maps in electronic media without express written consent is forbidden.
32