Before Using Your Appliance - Oster FPSTJE316R Instruction Manual

BEF O RE U S I N G YOUR APPLIAN CE
Follow the assembling instructions listed below before using your Oster
Extractor:
1. Before you start assembling your juice extractor, make sure it is unplugged and it
is placed on a dry and level surface.
2. Place filter basket on top of the motor base (Figure 1).
3. Place the stainless steel filter on top of the filter basket pushing down and turning
it until it fits into the grooves of the motor shaft (Figure 2).
4. Place juicer cover/lid on top of the filter basket (Figure 3).
Fig. 1
5. Raise the safety locking arms, then lower them to securely fit into the grooves in
the lid and then firmly press lower part of the locking arms into the unit ensuring
they lock the lid into the unit (Figure 4).
6. Place the pulp container into position by tilting it slightly (Figure 5).
IMPORTANT: Make sure Pulp Container edge is underneath basket.
7. Place the juice container under the spout located on the right hand side of the
juicer by tilting it slightly. Other jars or glasses can be used as well (Figure 6).
Fig. 4
Fig. 2
Fig. 5
En gl ish -4
Juice
®
Fig. 3
Fig. 6