Before Using For The First Time; U Si N G Yo U R A Ccesso R Y - Oster BLSTCJ-W00-011 Instruction Manual

LE ARN I N G A B OU T YOU R A CC ESSOR Y
1. Cone reamer – With special design ensures maximum juice extraction.
2. Strainer – Pulp strainer separates pulp and seeds from juice.
3. Juice Jar – Large 750 ml easy-pour serving pitcher allows to prepare a large
quantity of juice at a time
4. Accessory Base – Transfers the power of your blender motor base to the Citrus
Juicer Accessory.
B EF ORE U SI NG F OR TH E FIR S T T IM E
After unpacking, disassemble unit before using for the first time. Wash all parts (except
Accessory Base) in warm, soapy water. Rinse and dry immediately. DO NOT IMMERSE
ADAPTOR IN ANY LIQUID. ALL PARTS EXCEPT ADAPTOR ARE TOP RACK
DISHWASHER-SAFE.

U SI N G YO U R A CCESSO R Y

1. Before assembly, make sure accessory base is operating
correctly.
2. Place jar on accessory base so that the tabs on the jar
line up with lock openings. Turn jar counterclockwise until
it locks in place and will not turn any further
(Figure 1).
3. Place strainer on jar so that the tabs on the strainer line
up with lock openings. Turn jar counterclockwise until it
locks in place and will not turn any futher.
4. Hold cone reamer and place over post of jar. Ensure cone
reamer it is seated on the post as far as it will go (Figure
2). Always place cone reamer in citrus juicer accessory
before using it.
5. Place accessory base on the motor base of your Oster
blender (Figure 3). DO NOT OPERATE UNIT UNLESS
COMPLETELY ASSEMBLED.
6. Cut fruit (orange, lime, lemon or grapefruit) in half.
7. The unit comes with a universal cone reamer designed for any size citrus fruit.
8. Turn blender on. Select the lowest speed setting and increase as needed.
ALWAYS HOLD CITRUS JUICER ACCESSORY FIRMLY WITH ONE HAND
WHEN STARTING UNIT AND WHEN JUICING.
En gl ish -4
®
Fig 1
Fig 2