Checking The Compressor Drive Belt; Changing The Climate Control Air Filter - Hyundai Tiburon Owner's Manual

6
DO-IT-YOURSELF MAINTENANCE
18
G140D01A-AAT

Checking the Compressor Drive Belt

2.0L
A/C
0.315 in.
(8mm)
Tension pulley
Crankshaft pulley
2.7 L
Power steering
Auto tensioner
A/C
comp.
Generator
Crankshaft pulley
G190A02B
When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22
lb.(98N), the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.
HTB219
CHANGING THE CLIMATE CON-
TROL AIR FILTER
G145A03GK-GAT
(In front of blower unit) (If installed)
The climate control air filter is located in front of
the evaporator unit behind the glove box.
It helps to decrease the amount of pollutants
entering the car.
HGK2111
1. Remove the mounting screws on the down-
side of the glove box.