Airflow Direction; Quiet Operation (Cooling Mode/Cooling Area Of Dry Mode) - Panasonic CS-E9PB4EA Service Manual

Hide thumbs Also See for CS-E9PB4EA:
Table of Contents

Advertisement

12.4 Airflow Direction

1. There is one type of airflow, vertical airflow (directed by horizontal vane).
2. Control of airflow direction can be automatic (angles of direction is determined by operation mode, heat
exchanger temperature and intake air temperature) and manual (angles of direction can be adjusted using
remote control).
12.4.1
Vertical Airflow
Operation Mode
Heating
Cooling
Soft Dry
1.
Automatic vertical airflow direction can be set using remote control; the vane swings up and down within the angles as stated
above. For heating mode operation, the angle of the vane depends on the indoor heat exchanger temperature as Figure 1
below. When the air conditioner is stopped using remote control, the vane will shift to close position.
2.
Manual vertical airflow direction can be set using remote control; the angles of the vane are as stated above and the positions
of the vane are as Figure 2 below. When the air conditioner is stopped using remote control, the vane will shift to close
position.

12.5 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)

Purpose
To provide quiet cooling operation compare to normal operation.
o
Control condition
Quiet operation start condition
o
When "POWERFUL/QUIET" button at remote control is pressed twice.
POWERFUL/QUIET LED illuminates.
Quiet operation stop condition
o
When one of the following conditions is satisfied, quiet operation stops:
POWERFUL/QUIET button is pressed again.
Stop by OFF/ON switch.
Timer "off" activates.
When quiet operation is stopped, operation is shifted to normal operation with previous setting.
When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
During quiet operation, if timer "on" activates, quiet operation maintains.
After off, when on back, quiet operation is not memorised.
Control contents
Fan speed is changed from normal setting to quiet setting of respective fan speed.
o
Fan speed for quiet operation is reduced from setting fan speed.
Airflow Direction
Auto with Heat Exchanger
Temperature
Manual
Auto
Manual
Auto
Manual
A
Upward fix
B
Downward fix
C
Upward fix
55
Upper Vane Angle (°)
1
2
3
4
20
58
20
20
33
45
58
20 ~ 70
20
33
45
58
20 ~ 70
20
33
45
58
5
70
70
70

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cu-e9pb4eaCs-e12pb4eaCu-e12pb4ea

Table of Contents