Yealink SIP-T23 Provisioning Manual page 231

Parameter
features.pickup.group_pickup_code
features.pickup.direct_pickup_enable
features.pickup.direct_pickup_code
Permitted
Descriptions
Values
0-Disabled
1-Enabled
The default value is 0.
It configures the group call pickup code on a
phone basis.
String within The default value is blank.
32 characters
Note: The group call pickup code configured
on a per-line basis takes precedence over
that configured on a phone basis.
It enables or disables the IP phone to display
the DPickup soft key when the IP phone is in
the pre-dialing screen.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the directed call pickup code on
a phone basis.
String within
The default value is blank.
32 characters
Note: The directed call pickup code
configured on a per-line basis takes
precedence over that configured on a phone
Appendix
Web Setting Path
Features->Call Pickup->Group Call
Pickup Code
Features->Call Pickup->Directed Call
Pickup
Features->Call Pickup->Directed Call
Pickup Code
227