Hammer Strength OHDMR Assembly Instructions Manual page 13

FIGURE 10
25
23
19
17 1/2 X 1-1/2"
20
15
STEP 10:
• Assemble two SWIVEL SPOTTERS (25) to the BOTTOM UPRIGHT SUPPORT (15) as shown using four 1/2 X 1-1/2" BOLTS (17), four
1/2" INT TOOTH LOCK WASHERS (20), four 1/2" FLAT WASHERS (19) and four 1/2" LOCK NUTS (23). See FIGURE 10. (NOTE:
Tighten connection SECURELY then back nut off 1/2 turn.)
13