Reverse Stitch Control; Setting Spool Pins; Removing Or Inserting The Bobbin Case - Janome 3022 Instruction Book

Reverse Stitch Control

Press the stitch control to sew in reverse.

Setting Spool Pins

The spool pins are used for holding the spools
of thread when feeding the thread to the ma-
chine.
To use, pull up the spool pins. Push down for
storage.

Removing or Inserting the Bobbin Case

Open the hook cover.
q Hook cover
q
Raise the needle by turning the handwheel toward
you.
Take out the bobbin case by holding the latch.
w Latch
w
When inserting the bobbin case, place the horn
e
into the recess of the hook race.
e Horn
14