Changing The Vibrate Setting; Adjusting The Ringer Volume Or Turning The Ringer Off While Ringing - Panasonic KX-TCA185 Operating Instructions Manual

Panasonic dect 6.0 portable station
Hide thumbs Also See for KX-TCA185:
Table of Contents

Advertisement

R To set the ringer pattern, see "Incoming Option" on Page 64.

Changing the Vibrate Setting

1. Press
or the [CENTER] navigation key.
2. Select "Setting Handset" by pressing the arrow keys, and then press
3. Select "Incoming Option" by pressing the arrow keys, and then press
4. Select "Vibrate" by pressing the arrow keys, and then press
5. Press [
] or [
] to select the desired setting (Vib.&Ring, Vib.®Ring, Off), and then press
R To set Vibrate only, without ringing, select "Vib.&Ring" and set the Ringer Volume to "Off", or turn
Silent Mode on. See Page 20.
Adjusting the Ringer Volume or Turning the Ringer off
1. Press
or the [CENTER] navigation key.
2. Select "Ringer Volume" by pressing the arrow keys, and then press
3. Press [
] or [
] to select the desired setting (Step Up, Step Down, Level 1–6, Off), and then press
.
Note
R When using the unit in a loud environment, it is recommended to set the Ringer Type to "1", "2", "9",
"30" or "32", and the Vibrate setting to "Vib.&Ring".
R For details about setting the ringer pattern, see "Incoming Option" on Page 64.

Adjusting the Ringer Volume or Turning the Ringer off while Ringing

While receiving a call
To adjust the ringer volume, press [
To turn the ringer off, press
*1 The adjusted volume level will also be used for subsequent calls.
Note
R If you attach the headset while receiving an incoming call, the ring from the handset does not switch to
the headset. If you attach the headset before receiving an incoming call, and headset tone is set to
"On", a tone will be heard from the headset. If Vibrate is set to "On", the handset will vibrate whether a
headset is attached or not. For details, see "Incoming Option" on Page 64.
Adjusting the Receiver/Speaker/Headset/Bluetooth headset Volume
During a conversation, press [
*1 KX-TCA285/KX-TCA385 only
] or [
] to adjust the volume.
or
.
] or [
] to adjust the volume (Level 1–6).
Before Operating the Telephone
.
.
.
.
*1
.
*1
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tca285Kx-tca385

Table of Contents