www.aeroplusrc.com
Refit the cowl and drill where the marked hole was.
The fuel tank is pre‐installed. Attach petrol proof pipe as per labelling on tank
Use the supplied pushrod with a ball joint to connect to the throttle arm on the engine. Then find a convenient place to locate the throttle servo
using the supplied mount.
Install the engine box cover plate once all connections have been made for the engine.
Electric
Assemble the supplied electric motor box and bolt to the engine bulkhead.
Depending on the length of your motor you may need to use the supplied round plywood spacers to achieve the correct length for the motor.
Mount the ESC in airflow on the side of the electric motor mount, using a velco strap.
AeroPlus RC Copyright 2013 © All Rights Reserved
service@aeroplusrc.com